US2 Series Motor

How it works Videos

Product Features

Simple Wiring Setup

Watch demonstration
start immediately
Connect the motor and speed controller, you can start immediately by simply connecting to a power source.
One-touch connection
Motor and speed controller at One-touch connection with connector. Between the motor and speed controller, it can be extended to a maximum of 10.5m.
built-in capacitor
Because of the built-in capacitor ,it does not require wiring, thus save space.

Easy Speed Control

Turn and dial,
Set to the desired value and
simply press the dial pop.
You can confirm the rotation speed. You can lock data setting to prevent the set speed from changing.
With one switch, the motor can be started. The motor starts when the switch is set to the "RUN" position. If set to the "STAND-BY" position, the motor decelerates to a stop.
The rotation direction of the motor can be changed with easy operation. Switching the rotation direction is possible with the rotation direction switch. It is possible to switch direction even when the motor is in operation.

Easy to Start (Operate panel below )

With one switch, the motor can be started. The motor starts when the switch is set to the "RUN" position. If set to the "STAND-BY" position, the motor decelerates to a stop. The motor can be easily operated with the operating switch on the front side.

For illustration purposes*

Motor Technology

US2 Series Motor

High permissible torque,high-strength gearhead

A variety of improvements have been made internally. It means that there is a higher permissible torque as the motor to gearhead transmission is better. D-loop achieves stable operation with small speed fluctuation. The improved internal structure causes lower noise generation. The more you use, the better you can feel the definite evolution.

Product Structure

Gearhead

• Long life
• Low noise
• High torque
• High gear ratio
• Thicker output shaft

Motor

• Fanless
• Low heat
• Low vibration
• Low noise
• High efficiency

Combination Type

• Motor and gearhead pre-assembled
• Hassle-free

Brochure Download

Product Lineup

Product specification

US2 Series lineup

Each model is specifically designed according to the power supply specification, delivering the optimal performance in your power source environment.

Type Voltage (V) Top: motor mounting angle / lower: Output
60mm
70mm
80mm
90mm
6W
15W
25W
40W
60W
90W
Parallel Shaft Combination Type
Parallel Shaft Combination Type
Single-phase 100, Single-phase 200, Single-phase 110/115, Single-phase 220/230
Round Shaft Type
Round Shaft Type
Single-phase 100, Single-phase 200, Single-phase 110/115, Single-phase 220/230