Home > Product Information > Motorized Actuators >
DGII Series > List of Product > DGM130R-AZAC+AZD-C+CC030VZF
- Accessory
- Actuator: None
Control Circuit: Connector for the Main Power Supply and Regeneration Unit(CN4) , I/O Signals Connector(CN5) , Connector for 24 VDC Power-Supply Input/Electromagnetic Brake Connection/Regeneration Unit Thermal Input/Power Cutoff Signal I/O(CN1) , Connector wiring lever
- Safety Standards
-
| Product Type | Product Name | ProductLeadtime | UnitPrice(USD) | |
|---|---|---|---|---|
| Hollow Rotary Actuator | DGM130R-AZAC | 16 Working Days | 1,925.00 | |
| Control Circuit | AZD-C | 11 Working Days | 517.00 | |
| Connection Cable | CC030VZF | 11 Working Days | 57.00 |
Forbetterservices,MalaysiacustomersandThailandcustomerspleasecontactourMalaysiaandThailandbranch.
●Production Information
Current product
| Motor Type | αSTEP AZ Series |
|---|---|
| Shaft Type | Standard (Single Shaft) |
| Output Table Supporting Bearing | Cross-Roller Bearing |
| Frame Size | 130 mm |
| Electromagnetic Brake | Without |
| Specification | Standard Cable (3 m) |
| Motor Connection Direction | Motor Vertical Mounting |
| Driver Type | Pulse Input Type |
| Repetitive Positioning Accuracy | ±15 arcsec (±0.004°) |
| Maximum Speed | 1200 deg/s (200 r/min) |
| Lost Motion | 2 arcmin (0.033°) |
| Permissible Torque | 12 N·m |
| Inertial Moment J | 147380×10^-7 kg·m^2 |
| Gear Ratio | 18 |
| Angular Transmission Error | 3 arcmin (0.05°) |
| Permissible Thrust Load | 2000 N |
| Permissible Moment Load | 50 N·m |
| Runout of Output Table Surface | 0.015 mm |
| Runout of Output Table Inner (Outer) Diameter | 0.015 mm |
| Parallelism of Output Table | 0.030 mm |
| Actuator Degree of Protection | IP40 *1 |
| Speed and Positioning Control Command | Pulse Input |
| Power Supply Input - Voltage | Single-Phase / Three-Phase 200-240VAC -15 ~ +6% |
| Power Supply Input - Frequency | 50/60 Hz |
| Power Supply Input - Control Power Supply | 24 VDC±5% , 0.25 A |
| Mass: Actuator | 2.7 kg |
| Mass: Control Circuit | 0.65 kg |
| Cable Drawing Direction | Down side |
- · Cable Drawing Direction: Down side
· Holding Torque at Motor Standstill(Power ON): 12 N·m
· Minimum Traveling Amount of the Output Table: 0.01 deg/STEP
- * UL/CE Mark, for motor product names, not actuator product names.
*1 Degree of Protection IP20 for motor connector
- Note
· The motor cable and electromagnetic brake cable from the motor cannot be connected directly to the driver. When connecting to a driver, use a connection cable.
· The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.
· The motor can not be removed.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Actuator | D4502.dxf |
|---|---|---|
| Actuator Home Sensor Set(Sold separately) Installation | D4504.dxf | |
| Control Circuit | B1097.dxf | |
| 3D-CAD | Actuator(STEP) | D4502.zip |
| Control Circuit(STEP) | B1097.zip | |
| 3D-CAD(web2CAD) | Actuator | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Document | APPENDIX UL Standards for AZ Series AC power input type | HM-60247E.pdf |
| UL Certification(Motor) | UL_E336472V2S1.pdf | |
| UL Certification(Control Circuit) | UL_E171462V2S21.pdf | |
| CE Declaration of Conformity | CE-6059.pdf | |
| Catalogue | Hollow Rotary Actuators DGII Series (AZ Series Battery-Free Absolute Sensor Equipped) | DG2_AZ_Series_202003.pdf |
| Operating Manual | Hollow Rotary Actuator DGII Series Actuator OPERATING MANUAL | HL-80002E.pdf |
| Motorized actuator Hollow rotary actuator Function Setting Edition | HL-80019E.pdf | |
| Motorized Actuators Function Setting Edition | HL-17193E.pdf | |
| AZ Series AC power input Driver | HM-60314E.pdf | |
| AZ Series Function Edition | HM-60262E.pdf |
| Dimension |
|---|
|
Actuator Control Circuit Cable |
| Characteristics Diagram |
|---|
|
Speed – Torque Characteristics Load Inertia – Positioning Time Mechanical Precision (At no load) Displacement by Load Moment |
| Other specifications |
|---|
|
Other specifications |