Home > Product Information > Stepping Motors >
αSTEP AS Series Pulse Input Type > List of Product > AS98MSE-P10
- Accessory
- Motor, Control Circuit, Surge Suppressor, Parallel Key, Connector for I/O Signal, Mounting Bracket for Control Circuit (with screws), Operating Manual
- Safety Standards
-
| Product Name | ProductLeadtime | UnitPrice(USD) | |
|---|---|---|---|
| AS98MSE-P10 | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 31/Mar./2019
●Component Name
ASM98MCE-P10（Motor）
ASD16A-S（Control Circuit）
| Frame Size | 90mm |
|---|---|
| Type | PL Geared Type |
| Shaft Type | Single Shaft |
| Electromagnetic Brake | With |
| Maximum Holding Torque | 18N･m |
| Rotor Inertia J | 1560×10^-7kg･m^2 |
| Backlash | 15min(0.25˚) |
| Speed Range | 0-180r/min |
| Gear Ratio | 10 |
| Resolution Setting: 1000 P/R | 0.036˚/Pulse |
| Rated Torque | 18N･m |
| Power Supply Input Voltage | Three-Phase 200-230VAC |
| Power Supply Input Permissible Voltage Range | -15～+10% |
| Power Supply Input Frequency | 50/60Hz |
| Power Supply Input Current | 1.9A |
| Electromagnetic Brake Type | Power off activated type |
| Electromagnetic Brake Power Supply | 24 VDC ±5% |
| Electromagnetic Brake Power Supply Input | 6W |
| Electromagnetic Brake Power Supply Current | 0.25A |
| Electromagnetic Brake Power Static Friction Torque | 9N･m |
| Standard | UL、CSA |
| CE Marking | affixed |
| Speed and Positioning Control Command | Pulse Input |
| Maximum Input Pulse Frequency | 250 kHz (Duty: 50%) |
| Protective Function | When the following protective functions are activated, the alarm signal will be output, then the motor will coast to a stop. Overheat Protection, Overload Protection, Overvoltage Protection, Speed Error Protection, Overcurrent Protection, Overspeed, EEPROM Data Error, Sensor Error, System Error |
| Mass: Motor | 3.6kg |
| Mass: Control Circuit | 0.8kg |
- ●The resolution can be set to any one of 1000 P/R, 10000 P/R, 500 P/R, or 50000 P/R.
- Notes : Electromagnetic brakes are for holding the position when the power is OFF. The electromagnetic brake cannot be used to stop the motor. Also, a separate power supply of 24 VDC ±5%, 0.3 A or more is required for electromagnetic brakes.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Motor | B423.dxf |
|---|---|---|
| Control Circuit | B197.dxf | |
| 3D-CAD | Motor | B423.step |
| Control Circuit | B197.step | |
| 3D-CAD(web2CAD) | Motor | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Document | AS Series | st_as_a.pdf |
| Operating Manual | αSTEP AS Series | HM-40016E.pdf |
| Dimension |
|---|
|
Motor Control Circuit |
| Characteristics Diagram |
|---|
|
Speed – Torque Load Torque – Driver Input Current |
| Other specifications |
|---|
|
Other specifications |