Support Tool I/O Conversion Tool SPT-C02
| Product Name | Applicable Products | ||
|---|---|---|---|
| Before Replacement | After Replacement | ||
|
SPT-C02 | RK Series | RKII Series |
- *For the part number of the applicable products, refer to below.
Overview
The I/O conversion tool SPT-C02 is a tool to assist you in replacing the RK Series you are using with the RKII Series.
- The connection cable between the host controller and driver can be used without modification.
- There is no need to change the program of the host controller.
Note
The following restrictions apply to the use of the SPT-C02.
- Please note that the RKII Series differs in form-factor and characteristics from the RK Series currently used.
- An external power supply of 12 to 24 VDC is required.
- The following functions of the RK Series cannot be replaced using the SPT-C02.
Automatic all windings off release
Smooth drive release - The following shows how to operate the electromagnetic brake function.
- To set and switch between step angles is as follows.
- Customers are responsible for complying with laws, regulations, and standards by using SPT-C02.
Applicable Products
Materials
Dimensions (Unit mm)
Mounting Conversion Plate Guide
- Mounting conversion plate "SPT-M02" is also available to install the RKII Series driver where the old product was removed.
- If you have any questions about replacement, please contact the "Customer Support Center."