Equipped with Built-in Battery-Free Absolute Encoder
αSTEP AZ Series Multi-Axis Driver
DC Input
- DC Input
- Control of Up to 4 Axes
- Industrial Network Compatible
Tính năng |αSTEP AZ Series Multi-Axis Driver DC Input
Key Features of Multi-Axis Driver
3 Types of Interfaces
EtherCAT drive profile, MECHATROLINK-III, and SSCNETIII/H compatible products are available.
- For more details about the Slim Type, please contact your nearest branch, sales office, or Customer Support Center.
- *SSCNETⅢ/H is a registered trademark of Mitsubishi Electric Corporation.
- *MECHATROLINK is a registered trademark of MECHATROLINK Members Association.
- *EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Reduced Wiring and Cost
Multiple axes can be controlled with a single driver.
More Compact and Space Saving Compared to a Row of Single Axis Drivers (2-axis type and 4-axis type)
Rather than lining up network compatible Single Axis Drivers, installation space can be reduced.
Compatible With Support Software
Easy Drive From PC with Support Software MEXE02
By using the support software MEXE02, you can set and edit operation data and various parameters, as well as teach and monitor various conditions.
Click Here to Download the Support Software
Comprehensive Support From Start-up to Maintenance with a Variety of Functions
-
Startup and Evaluation
Useful functions for wiring check and test operation are provided.
- Setting and Saving of Operation Data
- I/O Monitoring
- Teaching, Remote Operation
-
Adjustment
The following functions are available to help you adjust motor operation after the equipment is installed.
- Waveform Monitoring
-
Diagnosis and Maintenance
Diagnostic and maintenance functions are available for trouble diagnosis and maintenance after operation is started.
- Alarm Monitoring
- Unit Information Monitor
- Status Monitor
Applications Shown in the Video
-
Parallel Link Robot
-
6-Axis Arm Robot
-
Typing Robot
-
Circular Interpolation Operation
Can be Combined With Various Motors and Mechanisms
Products that can be connected to multi-axis drivers are as follows.
For more details, please contact your nearest branch, sales office, or Customer Support Center.
Motor (DC input)
Series Name | Product Image (Typical example) | Overview |
---|---|---|
αSTEP AZ Series |
The motor is equipped with an ABZO sensor. Reduces the return-to-home time, and eliminates the need for control of external sensors. There are product lines from □20 mm to □60 mm, with various geared types also available. |
Electric Actuator (DC input)
These are αSTEP AZ Series equipped electric actuators.
Series Name | Product Image (Typical example) | Overview |
---|---|---|
Electric Linear Slides EZS Series |
2 types of linear slide sections are available: Straight type and reversed motor type. The simple dust-resistant structure made from a stainless steel sheet prevents ingress of foreign particles and reduces emission of dust. |
|
Electric Linear Slides EZS Series For Clean Room Use |
While maintaining the functionality and performance of the EZS Series, this product uses low-dust clean grease for ball screws, guides, and bearings to achieve clean room standards (ISO Standards Class 3). |
|
Electric Linear Slides EAS Series |
2 types of linear slide sections are available: Straight type and reversed motor type. |
|
Electric Cylinders EAC Series |
2 types of cylinder sections are available: Straight type and reversed motor type. |
|
Compact Electric Cylinders DR Series |
This is a ball screw mechanism product suitable for fine feeding and high precision positioning in a linear motion. Contributes to space saving and wiring reduction. Push-motion operation also possible. |
|
Compact Electric Cylinders DRS2 Series |
This is a ball screw mechanism product suitable for fine feeding and high precision positioning in a linear motion. Contributes to space saving and wiring reduction. Push-motion operation also possible. |
|
Rack-and-Pinion System L Series |
In addition to high precision positioning, it can also transport heavy loads to a maximum of 100 kg. |
|
Hollow Rotary Actuators DGII Series |
High power drive is possible due to the speed reduction mechanism inside the actuator. |
Product Line
Compatible Network | Power Supply Voltage | Number of axes | ||
---|---|---|---|---|
Dual axis | 3-Axis | 4-Axis | ||
SSCNET III/H Compatible | 24 VDC/48 VDC | ● | ● | ● |
MECHATROLINK-III Compatible | ● | ● | ● | |
EtherCAT Compatible* | ● | ● | ● |
- *ESI files required to use EtherCAT slave products in connection with Oriental Motor drivers are available.
To use the software, download from the product details page. (You must be logged in to download.)
Note
To connect the multi-axis driver, motor and electric actuator, a dedicated connection cable (sold separately) is required.
Be sure to prepare the number of axes for the motor and electric actuator to be connected.
Click here for a list of connection cable product lines and product names
Thu hẹp phạm vi sản phẩm
Tải xuống
Operating Manual
Support Software
Loại sản phẩm và thông tin liên quan
Combining With Other Manufacturers' Products