αSTEP AZ Series Multi-Axis Driver DC Input

AZD3A-KM3

In tất cả thông tin sản phẩm cùng một lúc
AZD3A-KM3

Control Circuit

Phân loại sản phẩm Tên sản phẩm Giá niêm yết Giá niêm yết Ngày vận chuyển
Control Circuit AZD3A-KM3 SGD 1,458 USD 1,166 5 Working Days
Multi-Axis Driver is DC input. Products that can be connected are AZ series DC power input motor and electric actuator equipped with them. For details, please contact your nearest sales office or Customer Support Center.

Bao gồm

  • Control Circuit: Connector Set for Driver

Thông số kỹ thuật

Kích thước

Multi-Axis Driver
Multi-Axis Driver

Multi-Axis Driver

Tải dữ liệu

Các thông số kỹ thuật khác

MECHATROLINK-III Specifications

Item Description
Transmission Rate 100 Mbps
Transmission Cycle 0.5 ms~4 ms (0.5 ms increments supported)
Station Address 03h~EFh (Initial Value: 03h)
Number of Transmission Bytes 32/48 bytes (Initial Value: 48 bytes)
Profile
  • Standard Stepper Motor Driver Profile
  • Standard servo profile

General Specifications

Degree of Protection IP10
Operating Environment Ambient temperature: 0~50 °C (non-freezing)
Humidity: 85 % max. (Non-condensing)
Altitude: Up to 3000 m above sea level
Atmosphere: No corrosive gases or dust. Do not expose to water or oil.
Storage Conditions
Shipping Environment		 Ambient temperature: -25~+70 °C (non-freezing)
Humidity: 85 % max. (Non-condensing)
Altitude: Up to 3000 m above sea level
Atmosphere: No corrosive gases or dust. Do not expose to water or oil.
Insulation Resistance

When a 500 VDC megger is applied to the following locations, resistance is min. 100 MΩ.

  • Between FG terminal - power supply terminal
Dielectric Strength

Sufficient to withstand the following for 1 minute:

  • Between FG terminal - power supply terminal 1 kVAC 50/60 Hz Leakage current 10 mA max.

Note

  • Disconnect the motor and driver when conducting the insulation resistance measurement or the dielectric strength test.
    Also, do not perform these tests on the ABZO sensor part of the motor.

Tiêu chuẩn

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Cấu hình hệ thống

System Configuration

Cáp và phụ kiện

Tải dữ liệu
In tất cả thông tin sản phẩm cùng một lúc
close
close