Brushless Motor (PM Motor) 750 W
- Smaller and more lightweight compared to three-phase AC motors with the same output power
- Achieves efficiency class IE5, saves energy and reduces electricity costs
- Fanless and low noise
- Operates in combination with an inverter
Tính năng |Brushless Motor (PM Motor) 750 W
- Speed Control is Possible With an Inverter. Compact, Energy-Saving, Low-Noise Brushless Motors
- Smaller and Lighter Motors Contribute to the Downsizing of Equipment to Reduce Burden During Installation
- IE5-Class High-Efficiency Motors Reduce Electricity Costs and CO2 Emissions
- Fanless for Low Noise
- Connector Type for Easy Connection
- Safe Even in Environments With Splashes/Sprays (Degree of protection: IP65/IP66/IP67)
- Motor Mounting Method Can Be Selected to Suit the Equipment
- Applications
- Lineup and Related Information
- Related Products
Speed Control Is Possible With an Inverter. Compact, Energy-Saving, Low-Noise Brushless Motors
The brushless motor uses a PM motor that uses a permanent magnet in the rotor. When combined with an inverter, a speed control range of 300 to 4000 r/min* is possible. It is smaller and lighter than a three-phase AC motor, reducing the burden on assembly workers. In addition, it achieves an efficiency level of IE5, contributing to reduced electricity costs and CO2 emissions.
- *Varies depending on the inverter being combined.
Significantly reduced motor size
Contributes to making equipment more compact
Achieved IE5 level
Reduced electricity costs
Fanless design reduces noise level
In addition, there is no scattering of dust and other particles.
Inverter-Connected
Reference Parameters for Brushless Motor and Inverter Combinations Are Available
Refer to the links below for combination reference parameters for brushless motors with inverters from other manufactures.
Mitsubishi Electric Corporation Inverter E800, D800
Fuji Electric Inverter FRENIC-Mini
Toshiba Industrial Products and Systems Corporation Inverter VF-S15
Rockwell Automation Inverter PowerFlex 525
Smaller and lighter motors contribute to the downsizing of equipment to reduce burden during installation
Brushless motors use permanent magnets in the rotor, making them highly efficient, compact, and lightweight.
In addition, the fanless structure has been achieved due to its high efficiency and low heat generation. It contributes to reducing equipment size and reducing the burden on workers.
- *The value for a typical three-phase AC motor 750W.
IE5-Class High-Efficiency Motors Reduce Electricity Costs and CO2 Emissions
Motor Output Power 750 W (IE5)
This motor satisfies the efficiency class IE5* for speed control motors. Contributes to reducing electricity costs and CO2 emissions.
- *Efficiency standard value (%) for speed control motors (rated speed 1801-6000 r/min) based on the international standard IEC TS 60034-30-2.
Energy-Saving Effect (Reference Value for 1 Unit)
Electricity costs and CO2 emissions can be reduced compared to 750 W induction motor (IE3).
| Brushless Motor 750 W + Inverter |
IE3 Standard Value (82.5 %)* Induction Motor 750 W |
Annual Reduction | |
|---|---|---|---|
| Annual Electricity Consumption | Approx. 7400 kWh/year | Approx. 7960 kWh/year | Reduced by 560 kWh/year |
| Annual Electricity Cost | Approx. 167,800 JPY/year | Approx. 180,600 JPY/year | Reduced by 12,800 JPY/year |
| Annual CO2 Emissions | Approx. 3380 kg/year | Approx. 3640 kg/year | Reduced by 260 kg/year |
- *Efficiency standard value (%) for induction motors (4 poles, 50 Hz) based on the international standard IEC 60034-30-1.
[Operating Conditions]
Operating Hours: 24 hours/day, 365 days/year
Unit Price of Electricity: 22.68 JPY/kWh
CO2 Emission Factor: 0.457 kg/kWh
Fanless for Low-Noise
Brushless motors have fanless structures due to their high efficiency and low heat generation. The noise level is reduced by approximately 20 dB when compared to a three-phase AC motor with fan.
(With Fan)
(Fanless)
Measurement Conditions
・No load
・Speed: 1500 r/min
・Measured at 15 cm from the back of the motor
The Scattering of Dust and Other Particles Is Reduced Due to It Being Fanless.
In the case of a motor with a fan, the cooling fan generates wind, which may scatter dust and other particles in the surrounding area.
Brushless motors have no risk of dust dispersal due to it being fanless.
Connector Type for Easy Connection
Cable connection is easy due to the locking lever that does not require screw fitting.
Reduces the hassle of connecting cables during motor installation and maintenance.
-
1. Plug in the connector
-
2. Turn down the locking lever
-
3. Connection complete
Safe Even in Environments With Splashes (Degree of protection: IP65/IP66/IP67*)
It is highly dust and water resistant and can be used in an environment where water droplets may splash on it.
- *The degree of protection varies depending on the motor type or the gearhead to be combined.
Motor Mounting Method Can Be Selected to Suit the Equipment
Brushless motors are compact and lightweight, it can be mounted directly to equipment using motor flanges.
In addition, foot mount can be possible when fix to the floor or pedestal using mounting bracket sold separately.
-
For Brushless Motors
-
Flange Mount 
-
Foot Mount Using Mounting Bracket 
-
-
For AC motors
Specifications for Brushless Motor Only
Refer to the following PDF data for motor specifications.
Applications
Conveyor (Chain conveyor)
Agitator
Crusher
Pump
Lineup and Related Information
Related Products
Brushless Motors
BLS Series
- Easy to Operate
- AC Input 750 W / DC Input 25 to 120 W
- Simple Type / RS-485 Communication Type Driver
- 100 to 2000 r/min / 100 to 4000 r/min