ORIENTAL MOTOR CO., LTD.

Induction Motors

BHI62C-A

In tất cả thông tin sản phẩm cùng một lúc
BHI62C-A

Motor

Phân loại sản phẩm Tên sản phẩm Giá niêm yết Giá niêm yết Ngày vận chuyển
Motor BHI62C-A SGD 243 USD 194 16 Working Days

Bao gồm

  • Motor: Capacitor, Capacitor Cap

Thông số kỹ thuật

Kích thước

Motor

Motor

Capacitor

Capacitor

Tải dữ liệu

Các thông số kỹ thuật khác

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV(three-phase 380/400/415 VAC is 2.0 kVAC) at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise After a gearhead or equivalent heat sink*is connected for rated operation at normal ambient temperature and humidity, the measurement value of the winding temperature rise is 70 °C max. using the resistance change method.
Thermal Class 130(B)
Overheat Protective Device Built-in thermal protector (automatic return type) Open: 150 ± 5 °C, Return: 96 ± 15 °C
Three-phase 380/400/415 V Type Open: 130 ± 5 °C, Return: 83 ± 15 °C
Operating Ambient Temperature Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection Lead wire type: IP40
Terminal box type: IP54 (Excluding mounting surface of round shaft type)
  • *Heat Sink Size: 230 × 230 mm, 5 mm thickness (Material: aluminum)

Permissible Radial Load and Permissible Axial Load of Round Shaft Type

Permissible Radial Load

Motor Permissible Radial Load
N
Frame Size □ (mm) Output Shaft Diameter φ (mm) From Shaft End
10 mm		 From Shaft End
20 mm
104 14 320 350

Permissible Axial Load

Avoid axial load as much as possible. If an axial load is unavoidable, keep it at half or less of the motor mass.

Radial Load and Axial Load

Tiêu chuẩn

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Cấu hình hệ thống

System Configuration

Cáp và phụ kiện

Tải dữ liệu
close