Thông số kỹ thuật

Đặc trưng

Starting and Braking Characteristics (Reference values)

Starting and Braking Characteristics (Reference values)

Kích thước

Motor/Gearhead

Motor/Gearhead

Tải dữ liệu

Các thông số kỹ thuật khác

General Specifications

Item	Specifications
Insulation Resistance	After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength	No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the coils and the case for 1 minute after rated operation at normal ambient temperature and humidity.
Temperature Rise	A gearhead or equivalent heat sink* is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class	130 (B)
Overheat Protective Device	6 W Type: Impedance protection Other Types: Built-in thermal protector (automatic return type) Open: 130 ± 5 °C, Return: 90 ± 15 °C (40 W Type: 82 ± 15 ℃)
Operating Ambient Temperature	Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity	85 % max. (Non-condensing)
Degree of Protection	IP65 (excluding mounting surface of the round shaft type)

• *Heat sink size (Material: Aluminum)

Motor Type (Output power)	Size (mm)	Thickness (mm)
6 W Type	115 x 115	5
15 W Type	125 x 125
25 W Type	135 x 135
40 W Type	165 x 165

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name	Gear Ratio	Maximum Permissible Torque N·m	Permissible Radial Load N		Permissible Axial Load N
			From Shaft End 10 mm	From Shaft End 20 mm
2GN□S	3~18	3.0	50	80	30
	25~180		120	180
3GN□S	3~18	5.0	80	120	40
	25~180		150	250
4GN□S	3~18	8.0	100	150	50
	25~180		200	300
5GN□S	3~18	10	250	350	100
	25~180		300	450

Tiêu chuẩn

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Cấu hình hệ thống

Cáp và phụ kiện

Tải dữ liệu

• Thông số kỹ thuật
• Đặc trưng
• Kích thước
• Tải dữ liệu
• Các thông số kỹ thuật khác
• Tiêu chuẩn
• Cấu hình hệ thống
• Cáp và phụ kiện

In tất cả thông tin sản phẩm cùng một lúc