Thông số kỹ thuật

Đặc trưng

Speed - Torque Characteristics (Reference values)

Speed - Torque Characteristics (Reference values)

Load Torque - Driver Input Current Characteristics

Load Torque - Driver Input Current Characteristics

Kích thước

Motor

Motor

Control Circuit

Control Circuit

Connection Cable (When Selected)

Connection Cable (When Selected)

Tải dữ liệu

Các thông số kỹ thuật khác

Driver Specifications

Driver Product Name		AZD-KRED	AZD-KREP	AZD-KRPN	AZD-KREN	AZD-KR2D	AZD-KRX
Interface	Pulse Input	－					2 points, photocoupler Maximum Input Pulse Frequency Line Driver: 1 MHz (at 50% duty) Open Collector: 250 kHz (at 50% duty)
	Control Input	20~32 V DC 2 points, photocoupler				－	4.5~32 V DC 5 points, photocoupler
	Control output	－					4.5~32 V DC 3 points, photocoupler and open-collector
	Field Network	EtherCAT	EtherNet/IP	PROFINET	Modbus TCP Modbus UDP	RS-485 Communication	RS-485 Communication

Driver function

Driver Product Name				AZD-KREP AZD-KRPN AZD-KREN AZD-KR2D	AZD-KRX
Number of Positioning Data Sets				256 Points	256 Points*1
Remote I/O		Input		16 Points
		Output		16 Points
Setting Tool				Support Software MEXE02
Coordinates Management Method				Battery-free Absolute System
Operation	Positioning Operation	Product Line	Positioning Operation	○
			Positioning Push-Motion Operation*2	○
		Fastening method	Single-motion Operation	○
			Sequential Operation	○
			Multistep Speed-Change (Configuration Connection)	○
		Sequence Control	Loop Operation (Repeating)	○
			Event Jump Operation	○
	Speed Control Operation (Continuous operation)			○
	Return-To-Home Operation		Return-to-Home Operation*3	○
			High-speed return-to-home operation	○
	JOG Operation			○
Monitor/Information			Waveform Monitoring	○
			Overload Detection	○
			Overheat Detection (Motor and Driver)	○
			Position/Speed Information	○
			Temperature Detection (Motor and Driver)	○
			Motor Load Factor	○
			Travel Distance , Cumulative Travel Distance	○
Alarm				○

*1

It can be used by setting it with the MEXE02 support software.

*2

Push-motion operation is not available for the geared motor and electric actuator DGII Series.

*3

Return-to-home operation using direct I/O is not available for AZD-KR2D.

Communication Specifications

Transmission Rate	100 Mbps
Mode	Full duplex (autonegotiation)
Cable Specification	Shielded twisted pair (STP) cable Straight/cross, Category 5e or higher recommended
Communication Connector	RJ45×2 (shield compatible)
Supported Topologies	Star, tree, line

General Specifications

		Motor	Driver
			AZD-KRED AZD-KREP AZD-KRPN AZD-KREN AZD-KRX	AZD-KR2D
Thermal Class		130(B) [Certified at 105 (A) when UL/CSA Standards were obtained]	−
Insulation Resistance		100 MΩ or more when a 500 VDC megger is applied between the following places. Between case and − Motor Winding Between case and − Electromagnetic Brake Winding*1	−
Dielectric Strength		Sufficient to withstand the following for 1 minute: AZM14, AZM15, AZM24, AZM26 Between case and − Motor Winding 0.5 kVAC　 50 Hz or 60 Hz AZM46, AZM48, AZM66, AZM69 Between case and − Motor Winding 1.0 kVAC　 50 Hz or 60 Hz Between case and − Electromagnetic Brake Winding*1 1.0 kVAC　 50 Hz or 60 Hz	−
Operating Environment (when operating)	Ambient Temperature	0~+40 ℃ (Non-freezing)	0~+50 ℃ (Non-freezing)
	Ambient Humidity	85 % max. (Non-condensing)
	Atmosphere	Cable Type: No corrosive gases or dust. No exposure to water, oil or other liquids. Connector type: No corrosive gases or dust. No exposure to oil or other liquids.	No corrosive gases or dust. No exposure to water, oil or other liquids.
Degree of Protection		Cable type (except for mounting surface and connector part): AZM14, AZM15, AZM24, AZM26, AZM46*2 、 AZM48*2 , AZM66*2 , AZM69*2: IP40 AZM46, AZM48, AZM66, AZM69: IP66 Connector type (when the connection cable is connected. Excluding the mounting surface and connector parts on the driver side of the connection cable): IP66	IP20	IP10
Stop Position Accuracy		AZM14, AZM15, AZM24, AZM26: ±5 arcmin (±0.083˚) AZM46, AZM48: ±4 arcmin (±0.067˚) AZM66, AZM69: ±3 arcmin (±0.05˚)
Shaft Runout		0.05 T.I.R. (mm)*3	−
Concentricity of Installation Pilot to the Shaft		0.075 T.I.R. (mm)*3	−
Perpendicularity of Mounting Surface to the Shaft		0.075 T.I.R. (mm)*3	−
Multi-Rotation Detection Range in Power OFF State		AZM14, AZM15, AZM24, AZM26: ±450 rotations (900 rotations) AZM46, AZM48, AZM66, AZM69: ±900 rotations (1800 rotations)

*1

(Only for types with electromagnetic brake)

*2

When the motor cable shape is horizontal pull-out

*3

T.I.R. (Total Indicator Reading): The total dial gauge reading when the measurement section is rotated once centered on the reference axis center.

Note

• Disconnect the motor and driver when measuring insulation resistance, or conducting a dielectric strength test.
  Also, do not conduct these tests on the ABZO sensor part of the motor.

Permissible Radial Load and Permissible Axial Load

Unit: N

Type	Motor Frame Size Dimension	Motor Product Name	Gear Ratio	Permissible Radial Load					Permissible Axial Load
				Distance From Shaft End [mm]
				0	5	10	15	20
Standard Type	20 mm	AZM14 AZM15 AZME14	-	12	15	-	-	-	3
	28 mm	AZM24 AZM26 AZME24		25	34	52	-	-	5
	42 mm	AZM46		35	44	58	85	-	15
		AZM48		30	35	44	58	85
	60 mm	AZM66 AZM69		90	100	130	180	270	30
	85 mm	AZM98 AZM911		260	290	340	390	480	60
TS Geared Type	42 mm	AZM46	3.6, 7.2, 10	20	30	40	50	-	15
			20, 30	40	50	60	70	-
	60 mm	AZM66	3.6, 7.2, 10	120	135	150	165	180	40
			20, 30	170	185	200	215	230
	90 mm	AZM98	3.6, 7.2, 10	300	325	350	375	400	150
			20, 30	400	450	500	550	600
PS geared type	28 mm	AZM24	7.2, 10	45	60	80	100	-	40
	42 mm	AZM46	5	70	80	95	120	-	100
			7.2	80	90	110	140	-
			10	85	100	120	150	-
			25	120	140	170	210	-
			36	130	160	190	240	-
			50	150	170	210	260	-
	60 mm	AZM66	5	170	200	230	270	320	200
			7.2	200	220	260	310	370
			10	220	250	290	350	410
			25	300	340	400	470	560
			36	340	380	450	530	630
			50	380	430	500	600	700
	90 mm	AZM98	5	380	420	470	540	630	600
			7.2	430	470	530	610	710
			10	480	530	590	680	790
			25	650	720	810	920	1070
			36	730	810	910	1040	1210
			50	820	910	1020	1160	1350
PN Geared Type	28mm	AZM24	10	45	60	80	100	-	40
	42mm	AZM46	5	80	95	120	160	-	100
			7.2	90	110	130	180	-
			10	100	120	150	200	-
	60mm	AZM66	5	240	260	280	300	330	200
			7.2	270	290	310	340	370
			10	300	320	350	380	410
	90mm	AZM98	5	370	390	410	430	460	600
			7.2	410	440	460	490	520
			10	460	490	520	550	580
HPG Geared Type	40 mm	AZM46	5	150	170	190	230	270	430
			9	180	200	230	270	320	510
	60 mm	AZM66	5	250	270	300	330	360	700
			15	360	380	420	460	510	980
	90 mm	AZM98	5	600	630	670	710	750	1460
			15	830	880	930	980	1050	2030
Harmonic Geared Type	30 mm	AZM24	50, 100	100	135	175	250	-	140
	42 mm	AZM46		180	220	270	360	510	220
	60 mm	AZM66		320	370	440	550	720	450
	90 mm	AZM98		1090	1150	1230	1310	1410	1300
FC Geared Type	35 mm	AZM24	7.2, 15, 25	80	120	180	230	-	80
	42 mm	AZM46	7.2, 10, 20, 30	180	200	220	250	-	100
	60 mm	AZM66		270	290	310	330	350	200

• The product names are listed such that the product names are distinguishable.
• PS,PN, HPG Geared Type: When either the radial load or the axial load is applied, the permissible value is set as a value that satisfies the life of 20,000 hours.

  Click here for information about gearhead lifetime

Radial Load and Axial Load

Tiêu chuẩn

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Cấu hình hệ thống

Cáp và phụ kiện

Tải dữ liệu

• Thông số kỹ thuật
• Đặc trưng
• Kích thước
• Tải dữ liệu
• Các thông số kỹ thuật khác
• Tiêu chuẩn
• Cấu hình hệ thống
• Cáp và phụ kiện

In tất cả thông tin sản phẩm cùng một lúc