Watertight, Dust-Resistant Motors FPW Series
FPW690C2-12.5E

Geared Motor
Phân loại sản phẩm | Tên sản phẩm | Giá niêm yết | Giá niêm yết | Ngày vận chuyển |
---|---|---|---|---|
Geared Motor | FPW690C2-12.5E | SGD 546 | USD 437 | 3 Working Days |
Bao gồm
- Geared Motor: Capacitor, Capacitor Cap, Mounting Screws, Parallel Key
Thông số kỹ thuật
Kích thước
Tải dữ liệu
Các thông số kỹ thuật khác
General Specifications
Item | Specifications |
---|---|
Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. |
Dielectric Strength | After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute. |
Temperature Rise | After rated operation at normal ambient temperature and humidity, the winding temperature rise measured using the resistance change method was 80 °C max. (70 °C max. for three-phase type). |
Thermal Class | 130 (B) |
Overheat Protective Device | Built-in thermal protector (automatic return type) Open: 130 ±5 °C, Return: 85 ±20 °C |
Operating Ambient Temperature | Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) |
Degree of Protection | IP67 |
Note
- Since this is a special geared motor with a watertight and dust-resistant structure, decomposition of the motor part and gearhead part is not possible.
- The structure of the motor capacitor is not watertight or dust resistant.
Permissible Radial Load and Permissible Axial Load
Product Name | Gear Ratio | Maximum Permissible Torque N·m |
Permissible Radial Load N | Permissible Axial Load N |
|
---|---|---|---|---|---|
From Shaft End 10 mm |
From Shaft End 20 mm |
||||
FPW425 | 3~18 | 8.0 | 100 | 150 | 50 |
25~180 | 200 | 300 | |||
FPW540 | 3~18 | 10 | 250 | 350 | 100 |
25~180 | 300 | 450 | |||
FPW560 | 3~9 | 15 | 400 | 500 | 150 |
12.5~18 | 450 | 600 | |||
25~180 | 500 | 700 | |||
FPW690 | 3~9 | 30 | 550 | 800 | 200 |
12.5~180 | 650 | 1000 |

Tiêu chuẩn
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be found here.
Information about our compliance with safety standards for each of our product models can be found here.
Hazardous Substances
The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).
Cấu hình hệ thống
Cáp và phụ kiện
close

close

close