Thông số kỹ thuật

Đặc trưng

Characteristics Diagram

Characteristics Diagram

Kích thước

Dimensions (Body)

Dimensions (Body)

Panel Cut-Out

Panel Cut-Out

Tải dữ liệu

Các thông số kỹ thuật khác

General Specifications

Item	Specifications
Insulation Resistance	After continuous operation at normal ambient temperature and humidity, the measurement value between the windings and the case is 100 MΩ min. using a 500 VDC megger. (For MFD Series, 250 VDC megger, 10 MΩ min., for MFD915-48, 24A, 48S, MFD930-48, 24A, 48S, 500 VDC megger, 10 MΩ min.)
Dielectric Strength	No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the windings and the case for 1 minute after continuous operation, at normal ambient temperature and humidity. (For MFD Series, 50 Hz 500 VAC, for 1 minute)
Temperature Rise	After continuous operation at normal ambient temperature and humidity, when the temperature becomes constant, the value measured on the surface of the motor case using the thermometer method is 45 °C max. (For MFD Series, 15 °C max.)
Operating Voltage Range	MF Series: ±10 % (for each voltage) MFD Series: ±10 % (for each voltage)
Thermal Class	UL/CSA Standards: 105 (A), EN Standards: 120 (E)
Overheat Protection	MF Series: Built-in thermal protector (automatic return type) Open: 120±5 °C, Reset: 77±15 °C MFD Series: Built-in burnout prevention circuit
Operating Ambient Temperature	-10~+60 °C
Operating Ambient Humidity	85 % max. (non-condensing)
Painting color	Motor Case Section: Dark gray - MF Series Black - MFD Series Fan Case Section: Black Flange Section: Dark gray (MFD Series only)
Materials	Impeller: Aluminum, Casing: Steel plate, Motor Case: Aluminum die cast

Tiêu chuẩn

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Cấu hình hệ thống

Những sản phẩm tương tự

Thermostat for Fan

Products	Features
AM2-XA1	Features	Automatically operates and stops fans in response to temperature changes in the equipment. This helps improve the equipment's "environmental" performance in terms of energy savings, noise reduction, etc. Setting temperature range 0~+60 °C (setting error ±5 °C) Easy to set temperature with thumbwheel dial Designed for optimal air flow circulation, enabling stable operation Compact size Width 33 mm × Height 70 mm × Depth 42.5 mm *For the number of applicable cooling fans that can be used, click here.   Note Cannot be used with three-phase type fans.

Cáp và phụ kiện

Tải dữ liệu

• Thông số kỹ thuật
• Đặc trưng
• Kích thước
• Tải dữ liệu
• Các thông số kỹ thuật khác
• Tiêu chuẩn
• Cấu hình hệ thống
• Những sản phẩm tương tự
• Cáp và phụ kiện

In tất cả thông tin sản phẩm cùng một lúc