Induction Motors World K Series (GU type, former type)
5IK90GU-AWJ
Motor
| Phân loại sản phẩm | Tên sản phẩm | Giá niêm yết | Giá niêm yết | Ngày vận chuyển |
|---|---|---|---|---|
| Motor | 5IK90GU-AWJ | SGD 197 | USD 158 | 40 Working Days |
Bao gồm
- Motor, Capacitor, Capacitor Cap, Operating Manual
Thông số kỹ thuật
Tải dữ liệu
Các thông số kỹ thuật khác
General Specifications
| Item | Specifications |
|---|---|
| Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. |
| Dielectric Strength | After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV(three-phase 380/400 VAC is 2.0 kVAC) at 50 Hz or 60 Hz between the coils and the case for 1 minute. |
| Temperature Rise | A gearhead or equivalent heat sink*1 is connected for rated operation at normal ambient temperature and humidity, the measurement value of the winding temperature rise is 80 °C max. (70 °C max. for a three-phase 6 W type) using the resistance change method. |
| Thermal Class | 130(B) |
| Overheat Protective Device | The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 82 ± 15 °C |
| Operating Ambient Temperature | Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) |
| Operating Ambient Humidity | 85 % max. (Non-condensing) |
| Degree of Protection |
Lead Wire Type:
IP20
Terminal Box Type:
6 W (Excluding mounting surface of the round shaft type.) IP54*2
25 W~90 W round shaft type IP40 25 W, 40 W pinion shaft type IP54 60 W, 90 W pinion shaft type IP44 |
- *1
- Refer to the table below for the size of the heat sink. (Material: aluminum)
- *2
- Only when using a φ8.5 cable. (Otherwise, IP40)
| Motor Type (Output power) | Size (mm) | Thickness (mm) |
|---|---|---|
| 6 W Type | 115 x 115 | 5 |
| 15 W Type | 125 x 125 | |
| 25 W Type | 135 x 135 | |
| 40 W Type | 165 x 165 | |
| 60 W, 90 W Type | 200 x 200 |
Tiêu chuẩn
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be foundhere.
Information about our compliance with safety standards for each of our product models can be found here.
Cấu hình hệ thống
Cáp và phụ kiện
close
close