ORIENTAL MOTOR CO., LTD.

EC Fans EMU Series

EMU1238-1

In tất cả thông tin sản phẩm cùng một lúc
EMU1238-1

Fan

Phân loại sản phẩm Tên sản phẩm Giá niêm yết Giá niêm yết Ngày vận chuyển
Fan EMU1238-1 SGD 79 USD 63 11 Working Days

Bao gồm

  • Fan, Plug Cord for Power Supply (1 m, Product Name : PCA2B), Operating Manual

Thông số kỹ thuật

Đặc trưng

Air Flow - Static Pressure Characteristics

Air Flow - Static Pressure Characteristics

Kích thước

Dimensions (Body)

Dimensions (Body)

Panel Cut-Out

Panel Cut-Out

Tải dữ liệu

Các thông số kỹ thuật khác

General Specifications

Item EMU938, EMU1238 EMU1225
Insulation Resistance After continuous operation at normal ambient temperature and humidity, the measurement value between the input terminal and the frame is 100 MΩ min. using a 500 VDC megger.
 
 		 After continuous operation at normal ambient temperature and humidity, the measurement value between the lead wire and the frame is 100 MΩ min. using a 500 VDC megger.
 
 
Dielectric Strength No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the input terminal and the frame for 1 minute after continuous operation at normal ambient temperature and humidity.
 
 		 No abnormality is observed even with an application of 2.5 kVAC at 50 Hz between the lead wire and the frame for 1 minute after continuous operation at normal ambient temperature and humidity.
 
 

For the alarm type only, no abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the power-supply lead wire and the alarm lead wire for 1 minute after continuous operation at normal ambient temperature and humidity.
 
 
Temperature Rise After continuous operation at normal ambient temperature and humidity at maximum air flow, when temperature becomes constant, the measurement value of the winding temperature rise using the thermometer method is 30 °C max.
 
 		 After continuous operation at normal ambient temperature and humidity at maximum air flow, when temperature becomes constant, the measurement value of the winding temperature rise using the thermometer method is 35 °C max.
 
 
Thermal Class UL/CSA Standards: 105 (A)
EN Standards: 120 (E)
Electrical Appliance and Material Safety Act: 120 (E)		 UL/CSA Standards: 105 (A)
EN Standards: 120 (E)
Overheat Protection Built-in burnout prevention circuit
Operating Environment∗1 Ambient Temperature∗2 -20 to +75 °C -20 to +70 °C
Ambient Humidity 20 to 85 % (Non-condensing) 20 to 85 % (Non-condensing)
Storage Conditions∗1∗3 Ambient Temperature∗2 -30 to +75 °C -30 to +70 °C
Ambient Humidity 20 to 85 % (Non-condensing) 20 to 85 % (Non-condensing)
    ∗1 The operating environment and storage condition assumes conditions of being free from condensation, freezing, and vibration other than that of the fan, and external force.
    ∗2 Cannot be used in a temperature-controlled environment at -10 °C max., such as in a freezer.
    ∗3 The value for storage condition applies to short periods such as the period during transport.

Tiêu chuẩn

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Cấu hình hệ thống

System Configuration

Những sản phẩm tương tự

Thermostat for Fan

Products Features
AM2-XA1
AM2-XA1
Features

Automatically operates and stops fans in response to temperature changes in the equipment.
This helps improve the equipment's "environmental" performance in terms of energy savings, noise reduction, etc.

  • Setting temperature range 0~+60 °C (setting error ±5 °C)
  • Easy to set temperature with thumbwheel dial
  • Designed for optimal air flow circulation, enabling stable operation
  • Compact size
    Width 33 mm × Height 70 mm × Depth 42.5 mm
  • *For the number of applicable cooling fans that can be used, click here.
    •  

Note

  • Cannot be used with three-phase type fans.

Cáp và phụ kiện

Tải dữ liệu
close